Vuldb Updates

A vulnerability was found in libpng 1.6.43/1.6.44/1.6.45/1.6.46 and classified as critical. Affected by this vulnerability is the function png_create_read_struct. Such manipulation leads to buffer overflow. This vulnerability is documented as CVE-2025-28164. The attack can be executed remotely. There is not any exploit available.

A vulnerability has been found in Red Hat Keycloak and classified as problematic. Affected by this issue is some unknown functionality of the component org.keycloak.services.resources.admin. This manipulation causes information disclosure. This vulnerability appears as CVE-2025-13881. The attack may be initiated remotely. There is no available exploit.

This issue is likely a false positive. Please verify the cited sources and consider not including this entry.

A vulnerability classified as critical has been found in Linux Kernel up to 5.15.74/5.19.16/6.0.2. Affected is the function des3_ede_encrypt of the component xfrm. The manipulation leads to injection. This vulnerability is listed as CVE-2022-50445. The attack must be carried out from within the local network. There is no available exploit. It is recommended to upgrade the affected component.

A vulnerability marked as critical has been reported in Linux Kernel up to 6.3.4. The affected element is the function cdc_ncm_check_tx_max of the file net/core/skbuff.c of the component net. The manipulation leads to allocation of resources. This vulnerability is listed as CVE-2023-53667. The attack must be carried out from within the local network. There is no available exploit. It is suggested to upgrade the affected component.

A vulnerability classified as critical has been found in Innomic VibroLine VLX1 HD 5.0, VibroLine VLX2 HD 5.0, VibroLine VLX4 HD 5.0, VibroLine VLX6 HD 5.0 and VibroLine VLX8 HD 5.0 up to 2.1.1387/2.1.1866. This affects an unknown part of the component Modbus Handler. This manipulation causes missing authentication. This vulnerability is handled as CVE-2022-50979. The attack can only be done within the local network. There is not any exploit available.

A vulnerability classified as critical was found in Innomic VibroLine VLX1 HD 5.0, VibroLine VLX2 HD 5.0, VibroLine VLX4 HD 5.0, VibroLine VLX6 HD 5.0 and VibroLine VLX8 HD 5.0 up to 2.1.1387/2.1.1866. This vulnerability affects unknown code of the component Configuration Handler. Such manipulation leads to missing authentication. This vulnerability is uniquely identified as CVE-2022-50980. The attack can only be initiated within the local network. No exploit exists.

A vulnerability identified as critical has been detected in Innomic VibroLine VLX1 HD 5.0, VibroLine VLX2 HD 5.0, VibroLine VLX4 HD 5.0, VibroLine VLX6 HD 5.0 and VibroLine VLX8 HD 5.0 up to 2.1.1387/2.1.1866. This impacts an unknown function of the component Configuration Handler. Performing a manipulation results in missing authentication. This vulnerability is reported as CVE-2022-50977. The attack is possible to be carried out remotely. No exploit exists.

A vulnerability labeled as critical has been found in Innomic VibroLine VLX1 HD 5.0, VibroLine VLX2 HD 5.0, VibroLine VLX4 HD 5.0, VibroLine VLX6 HD 5.0 and VibroLine VLX8 HD 5.0 up to 2.1.1387/2.1.1866. Affected is an unknown function of the component Modbus Handler. Executing a manipulation can lead to missing authentication. This vulnerability appears as CVE-2022-50978. The attack may be performed from remote. There is no available exploit.

A vulnerability described as very critical has been identified in Innomic VibroLine VLX1 HD 5.0, VibroLine VLX2 HD 5.0, VibroLine VLX4 HD 5.0, VibroLine VLX6 HD 5.0 and VibroLine VLX8 HD 5.0 up to 2.1.1387/2.1.1865. Affected by this issue is some unknown functionality of the component Configuration Handler. The manipulation results in origin validation error. This vulnerability is known as CVE-2022-50975. It is possible to launch the attack remotely. No exploit is available. Upgrading the affected component is recommended.

A vulnerability identified as problematic has been detected in Innomic VibroLine Configurator 4.0 and VibroLine Configurator 5.0 up to 5.0.2486/5.1.2729. Affected by this issue is some unknown functionality of the component USB Handler. The manipulation leads to improper validation of consistency within input. This vulnerability is documented as CVE-2022-50976. The attack needs to be performed locally. There is not any exploit available. You should upgrade the affected component.

A vulnerability was found in Esri ArcGIS Pro up to 3.6.0. It has been rated as problematic. Affected by this vulnerability is an unknown functionality. The manipulation leads to cross site scripting. This vulnerability is documented as CVE-2026-1446. The attack needs to be performed locally. There is not any exploit available. Upgrading the affected component is advised.

A vulnerability was found in Kyverno up to 1.15.2/1.16.2. It has been rated as problematic. This vulnerability affects unknown code. The manipulation leads to allocation of resources. This vulnerability is traded as CVE-2026-23881. It is possible to initiate the attack remotely. There is no exploit available. Upgrading the affected component is advised.

A vulnerability has been found in OctoPrint up to 1.11.5 and classified as problematic. This affects an unknown function. This manipulation causes observable timing discrepancy. This vulnerability is tracked as CVE-2026-23892. The attack is only possible within the local network. No exploit exists. The affected component should be upgraded.

A vulnerability identified as problematic has been detected in Open5GS up to 2.7.6. This affects the function sgwc_s5c_handle_bearer_resource_failure_indication of the file src/sgwc/s5c-handler.c of the component SGWC. Performing a manipulation results in denial of service. This vulnerability is identified as CVE-2026-1521. The attack can be initiated remotely. Additionally, an exploit exists. It is recommended to apply a patch to fix this issue.

A vulnerability labeled as problematic has been found in Open5GS up to 2.7.6. This vulnerability affects the function sgwc_s5c_handle_modify_bearer_response of the file src/sgwc/s5c-handler.c of the component SGWC. Executing a manipulation can lead to denial of service. This vulnerability is tracked as CVE-2026-1522. The attack can be launched remotely. Moreover, an exploit is present. Applying a patch is advised to resolve this issue. The issue report is flagged as already-fixed.

A vulnerability, which was classified as problematic, was found in Tenda W30E V2 up to 16.01.0.19(5037). This impacts an unknown function of the component Administrative Endpoint. Such manipulation leads to permissive cross-domain policy with untrusted domains. This vulnerability is referenced as CVE-2026-24435. It is possible to launch the attack remotely. No exploit is available.

A vulnerability identified as problematic has been detected in LimeSurvey up to 4.3.10. Impacted is an unknown function of the component Administration Panel. The manipulation of the argument Surveymenu[title]/Surveymenu[parent_id] leads to cross site scripting. This vulnerability is referenced as CVE-2020-36993. Remote exploitation of the attack is possible. Furthermore, an exploit is available.

A vulnerability categorized as critical has been discovered in LibreNMS 1.46. The affected element is an unknown function of the component MAC Accounting Graph Endpoint. The manipulation of the argument sort results in sql injection. This vulnerability was named CVE-2020-36947. The attack may be performed from remote. In addition, an exploit is available.

A vulnerability was found in TryGhost Ghost. It has been rated as problematic. This affects an unknown part of the component Portal. This manipulation causes cross site scripting. This vulnerability is tracked as CVE-2026-24778. The attack is possible to be carried out remotely. No exploit exists. Upgrading the affected component is advised.