Vuldb Updates

A vulnerability classified as problematic was found in NetApp Active IQ Unified Manager for VMware up to 9.11. Affected is an unknown function. The manipulation results in cross site scripting. This vulnerability is reported as CVE-2022-23239. The attack can be launched remotely. No exploit exists. It is advisable to implement a patch to correct this issue.

A vulnerability categorized as critical has been discovered in USBView 2.1. Affected is an unknown function of the component Polkit Setting Handler. The manipulation results in improper authentication. This vulnerability was named CVE-2022-23220. The attack may be performed from remote. There is no available exploit. It is advisable to upgrade the affected component.

A vulnerability marked as very critical has been reported in Oracle Fujitsu M10-1, Fujitsu M10-4, Fujitsu M10-4S, Fujitsu M12-1, Fujitsu M12-2 and Fujitsu M12-2S. This affects an unknown function of the component XCP Firmware. The manipulation leads to buffer overflow. This vulnerability is documented as CVE-2022-23219. The attack can be initiated remotely. There is not any exploit available.

A vulnerability has been found in Algovate xhs-mcp 0.8.11 and classified as critical. This affects the function xhs_publish_content of the file src/server/mcp.server.ts of the component MCP Interface. Performing a manipulation of the argument media_paths results in server-side request forgery. This vulnerability was named CVE-2026-7417. The attack may be initiated remotely. In addition, an exploit is available. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was found in UTT HiPER 1250GW up to 3.2.7-210907-180535 and classified as critical. This vulnerability affects the function strcpy of the file route/goform/NTP. Executing a manipulation of the argument Profile can lead to buffer overflow. The identification of this vulnerability is CVE-2026-7418. The attack may be launched remotely. Furthermore, there is an exploit available.

A vulnerability was found in UTT HiPER 1250GW up to 3.2.7-210907-180535. It has been classified as critical. This issue affects the function strcpy of the file route/goform/formTaskEdit_ap. The manipulation of the argument Profile leads to buffer overflow. This vulnerability is referenced as CVE-2026-7419. Remote exploitation of the attack is possible. Furthermore, an exploit is available.

A vulnerability was found in UTT HiPER 1250GW up to 3.2.7-210907-180535. It has been declared as critical. Impacted is the function strcpy of the file route/goform/ConfigAdvideo. The manipulation of the argument Profile results in buffer overflow. This vulnerability is identified as CVE-2026-7420. The attack can be executed remotely. Additionally, an exploit exists.

A vulnerability was found in BurtTheCoder mcp-dnstwist up to 1.0.4. It has been declared as critical. Affected by this vulnerability is the function fuzz_domain of the file src/index.ts of the component MCP Interface. Executing a manipulation of the argument Request can lead to os command injection. The identification of this vulnerability is CVE-2026-7443. The attack may be launched remotely. Furthermore, there is an exploit available. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was found in Linux Kernel up to 6.6.121/6.12.67/6.18.7/6.19-rc6. It has been declared as critical. Affected by this vulnerability is the function st_lsm6dsx_write_event of the component iio. The manipulation of the argument event_spec results in null pointer dereference. This vulnerability is reported as CVE-2025-71198. The attacker must have access to the local network to execute the attack. No exploit exists. It is recommended to upgrade the affected component.

A vulnerability was found in Linux Kernel up to 6.6.121/6.12.66/6.18.6/6.19-rc5. It has been classified as critical. Affected is the function probe of the component stm32-usphyc. The manipulation of the argument index leads to off-by-one. This vulnerability is documented as CVE-2025-71196. The attack requires being on the local network. There is not any exploit available. Upgrading the affected component is recommended.

A vulnerability identified as critical has been detected in Linux Kernel up to 6.6.121/6.12.67/6.18.7/6.19-rc6. This vulnerability affects the function alarms_store of the component w1. Performing a manipulation of the argument buf results in buffer overflow. This vulnerability is known as CVE-2025-71197. Access to the local network is required for this attack. No exploit is available. You should upgrade the affected component.

A vulnerability was found in Linux Kernel up to 6.6.121/6.12.66/6.18.6/6.19-rc5 and classified as critical. This impacts an unknown function of the component dmaengine. Executing a manipulation of the argument max_register can lead to memory corruption. This vulnerability is registered as CVE-2025-71195. The attack requires access to the local network. No exploit is available. It is suggested to upgrade the affected component.

A vulnerability classified as critical was found in Linux Kernel up to 6.6.121/6.12.66/6.18.6/6.19-rc4. Affected is the function wait_current_trans of the component btrfs. Such manipulation of the argument btrfs_blocked_trans_types leads to deadlock. This vulnerability is listed as CVE-2025-71194. The attack must be carried out from within the local network. There is no available exploit. Upgrading the affected component is advised.

A vulnerability has been found in Linux Kernel up to 6.6.121/6.12.66/6.18.6/6.19-rc5 and classified as critical. This affects the function pm_runtime_enable of the component qcom-qusb2. Performing a manipulation results in null pointer dereference. This vulnerability is cataloged as CVE-2025-71193. The attack must originate from the local network. There is no exploit available. The affected component should be upgraded.

A vulnerability classified as critical was found in Linux Kernel up to 6.1.160/6.6.120/6.12.65/6.18.5/6.19-rc4. Impacted is the function snd_ac97_controller_register of the component ALSA. The manipulation results in double free. This vulnerability is identified as CVE-2025-71192. The attack can only be performed from the local network. There is not any exploit available. Upgrading the affected component is advised.

A vulnerability described as critical has been identified in Jenkins Matrix Authorization Strategy Plugin up to 3.2.9. This affects an unknown function of the component Configuration Handler. Executing a manipulation can lead to permission issues. This vulnerability appears as CVE-2026-42521. The attack may be performed from remote. There is no available exploit.

A vulnerability classified as critical was found in Jenkins GitHub Branch Source Plugin up to 1967.vdea_d580c1a_b_a_. Affected is an unknown function. The manipulation results in permission issues. This vulnerability is known as CVE-2026-42522. It is possible to launch the attack remotely. No exploit is available.

A vulnerability, which was classified as problematic, has been found in Jenkins GitHub Plugin up to 1.46.0. Affected by this vulnerability is an unknown functionality. This manipulation causes cross site scripting. This vulnerability is handled as CVE-2026-42523. The attack can be initiated remotely. There is not any exploit available.

A vulnerability marked as critical has been reported in Jenkins Credentials Binding Plugin up to 719.v80e905ef14eb_. The impacted element is an unknown function. Performing a manipulation results in privilege escalation. This vulnerability is reported as CVE-2026-42520. The attack is possible to be carried out remotely. No exploit exists.

A vulnerability classified as critical has been found in Jenkins Script Security Plugin up to 1399.ve6a_66547f6e1. This impacts an unknown function. The manipulation leads to permission issues. This vulnerability is traded as CVE-2026-42519. It is possible to initiate the attack remotely. There is no exploit available.