Vuldb Updates

A vulnerability described as problematic has been identified in Rockwell Automation MicroLogix 1100. This issue affects some unknown processing of the component RUN Mode. Executing a manipulation can lead to denial of service. The identification of this vulnerability is CVE-2021-33012. The attack may be launched remotely. There is no exploit available.

A vulnerability was found in XPodas Octopod. It has been declared as very critical. This vulnerability affects unknown code. The manipulation results in authentication bypass by primary weakness. This vulnerability only affects products that are no longer supported by the maintainer. This vulnerability is identified as CVE-2024-1202. The attack can be executed remotely. There is not any exploit available. It is recommended to upgrade the affected component.

A vulnerability has been found in Mergen Software Quality Management System up to 25032024 and classified as critical. The impacted element is an unknown function. This manipulation causes sql injection. The identification of this vulnerability is CVE-2024-2865. It is possible to initiate the attack remotely. There is no exploit available.

A vulnerability, which was classified as critical, has been found in Havelsan Dialogue 1.83.0. This affects an unknown function of the component ACL Handler. Performing a manipulation results in incorrect permission assignment. This vulnerability is reported as CVE-2024-3375. The attack is possible to be carried out remotely. No exploit exists. It is advisable to upgrade the affected component.

A vulnerability, which was classified as critical, was found in Grup Arge Energy and Control Systems Smartpower up to 24.05.27. This impacts an unknown function. The manipulation results in sql injection. This vulnerability is reported as CVE-2024-0851. The attack can be launched remotely. No exploit exists.

A vulnerability was found in Vadi Corporate Information Systems DIGIKENT GIS up to 2.23.5. It has been rated as critical. Affected is an unknown function. Performing a manipulation results in sql injection. This vulnerability is known as CVE-2024-1100. Remote exploitation of the attack is possible. No exploit is available.

A vulnerability was found in EMTA Grup PDKS up to 20240602. It has been declared as critical. This issue affects some unknown processing. Such manipulation leads to improper access controls. This vulnerability is referenced as CVE-2024-0336. The attack needs to be initiated within the local network. No exploit is available.

A vulnerability was found in TNB Mobile Solutions Cockpit Software up to 0.251.0. It has been classified as problematic. The impacted element is an unknown function. Performing a manipulation results in inclusion of sensitive information in source code. This vulnerability was named CVE-2024-1272. The attack may be initiated remotely. There is no available exploit. Upgrading the affected component is recommended.

A vulnerability, which was classified as critical, has been found in Next4Biz CRM & BPM Software Business Process Manangement 6.6.4.4. Affected by this issue is some unknown functionality. The manipulation leads to code injection. This vulnerability is documented as CVE-2024-5683. The attack can be initiated remotely. There is not any exploit available. It is advisable to upgrade the affected component.

A vulnerability marked as problematic has been reported in Next4Biz CRM & BPM Software Business Process Manangement 6.6.4.4. Affected by this vulnerability is an unknown functionality. Performing a manipulation results in cross site scripting. This vulnerability is identified as CVE-2024-4754. The attack can be initiated remotely. There is not any exploit available. It is suggested to upgrade the affected component.

A vulnerability was found in Mia Technology Mia-Med Health Aplication up to 1.0.13. It has been classified as problematic. Affected by this vulnerability is an unknown functionality. This manipulation causes risky cryptographic algorithm. This vulnerability appears as CVE-2024-3264. The attack may be initiated remotely. There is no available exploit. Upgrading the affected component is recommended.

A vulnerability was found in Mia Technology Mia-Med Health Aplication up to 1.0.13. It has been rated as problematic. This affects an unknown part. Performing a manipulation results in improper restriction of excessive authentication attempts. This vulnerability is known as CVE-2024-5862. Remote exploitation of the attack is possible. No exploit is available. Upgrading the affected component is advised.

A vulnerability categorized as problematic has been discovered in Rockwell MicroLogix 1100 and MicroLogix 1400. Affected is an unknown function. The manipulation results in improper access controls. This vulnerability is known as CVE-2017-7898. It is possible to launch the attack remotely. No exploit is available. It is advisable to upgrade the affected component.

A vulnerability identified as critical has been detected in Rockwell MicroLogix 1100 and MicroLogix 1400. Affected by this vulnerability is an unknown functionality. This manipulation causes inadequate encryption strength (Policy). This vulnerability is handled as CVE-2017-7903. The attack can be initiated remotely. There is not any exploit available. You should upgrade the affected component.

A vulnerability has been found in Brocade Fabric OS up to 7.4.2c/8.0.2e/8.1.2e/8.2.0 and classified as critical. The impacted element is an unknown function of the component Command Line Interface. Performing a manipulation results in improper access controls. This vulnerability is identified as CVE-2018-6439. The attack is only possible with local access. There is not any exploit available. The affected component should be upgraded.

A vulnerability described as critical has been identified in Rockwell MicroLogix 1400 Controller and 1756 ControlLogix Communications Module. The impacted element is an unknown function of the component CIP Connection Request Handler. Such manipulation leads to missing authentication (IP address). This vulnerability is documented as CVE-2018-17924. The attack can be executed remotely. There is not any exploit available.

A vulnerability was found in Siemens SIMATIC CP443-1 OPC UA, SIMATIC ET 200 Open Controller CPU 1515SP PC2, SIMATIC IPC DiagMonitor, SIMATIC NET PC Software, SIMATIC RF188C, SIMATIC RF600R, SIMATIC S7-1500 CPU, SIMATIC S7-1500 Software Controller, SIMATIC WinCC OA and SIMATIC WinCC Runtime Advanced and classified as problematic. Affected by this vulnerability is an unknown functionality of the component OPC Service. The manipulation as part of Network Packet results in uncaught exception. This vulnerability is reported as CVE-2019-6575. The attack can be launched remotely. No exploit exists. Applying restrictive firewalling is recommended.

A vulnerability labeled as problematic has been found in Rockwell Automation MicroLogix 1100, MicroLogix 1400, CompactLogix 5370 L1, CompactLogix 5370 L1, CompactLogix 5370 L2, CompactLogix 5370 L3 and CompactLogix GuardLogix. Affected by this issue is some unknown functionality. Such manipulation leads to open redirect. This vulnerability is uniquely identified as CVE-2019-10955. The attack can be launched remotely. No exploit exists.

A vulnerability, which was classified as problematic, was found in Rockwell Automation MicroLogix 1100, MicroLogix 1400 and RSLogix 500. This affects an unknown function. Executing a manipulation can lead to risky cryptographic algorithm. This vulnerability is registered as CVE-2020-6984. It is possible to launch the attack remotely. No exploit is available.

A vulnerability has been found in Rockwell Automation MicroLogix 1100, MicroLogix 1400 and RSLogix 500 and classified as critical. This impacts an unknown function. The manipulation leads to use of client-side authentication. This vulnerability is documented as CVE-2020-6988. The attack can be initiated remotely. There is not any exploit available.