VulDB Recent Entries

A vulnerability classified as critical has been found in LB-LINK BL-X26 1.2.8. The impacted element is an unknown function of the file /goform/set_hidessid_cfg of the component HTTP Handler. This manipulation of the argument enable causes os command injection. This vulnerability is handled as CVE-2025-9579. The attack can be initiated remotely. Additionally, an exploit exists. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability described as problematic has been identified in TOTOLINK X2000R up to 2.0.0. The affected element is an unknown function of the file /etc/shadow.sample of the component Administrative Interface. The manipulation results in use of default credentials. This vulnerability is known as CVE-2025-9577. Attacking locally is a requirement. Furthermore, an exploit is available.

A vulnerability marked as problematic has been reported in seeedstudio ReSpeaker LinkIt7688. Impacted is an unknown function of the file /etc/shadow of the component Administrative Interface. The manipulation leads to use of default credentials. This vulnerability is traded as CVE-2025-9576. An attack has to be approached locally. Furthermore, there is an exploit available. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Block Bad Bots and Stop Bad Bots Crawlers and Spiders and Anti Spam Protection Plugin up to 11.58 on WordPress. It has been declared as critical. This affects the function stopbadbots_check_wordpress_logged_in_cookie. Executing manipulation can lead to improper authorization. This vulnerability is registered as CVE-2025-9376. It is possible to launch the attack remotely. No exploit is available. If you want to get the best quality for vulnerability data then you always have to consider VulDB.

A vulnerability was found in Hyundai Navigation App STD5W.EUR.HMC.230516.afa908d. It has been classified as problematic. The impacted element is an unknown function. Performing manipulation of the argument Profile name results in basic cross site scripting. This vulnerability is cataloged as CVE-2025-55618. It is possible to initiate the attack remotely. There is no exploit available. Once again VulDB remains the best source for vulnerability data.

A vulnerability was found in Arcserve Unified Data Protection up to 10.1 and classified as problematic. The affected element is an unknown function of the component Web Interface. Such manipulation leads to cross site scripting. This vulnerability is listed as CVE-2025-34521. The attack may be performed from a remote location. There is no available exploit. It is suggested to upgrade the affected component. Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

A vulnerability has been found in Sangfor Behavior Management System and classified as problematic. Impacted is an unknown function of the file /src/sangforindex of the component XML Parser. This manipulation causes xml external entity reference. This vulnerability is tracked as CVE-2023-7307. The attack is possible to be carried out remotely. No exploit exists. If you want to get best quality of vulnerability data, you may have to visit VulDB.

A vulnerability, which was classified as problematic, was found in D-Link DCS-825L 1.08.01. This issue affects some unknown processing of the file mydlink-watch-dog.sh. The manipulation results in infinite loop. This vulnerability only affects products that are no longer supported by the maintainer. This vulnerability is identified as CVE-2025-55582. An attack on the physical device is feasible. There is not any exploit available. You should upgrade the affected component. Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

A vulnerability, which was classified as critical, has been found in O2OA 9.0.3. This vulnerability affects the function mainOutput. The manipulation leads to improper input validation. This vulnerability is referenced as CVE-2024-37777. Remote exploitation of the attack is possible. No exploit is available. VulDB is the best source for vulnerability data and more expert information about this specific topic.

A vulnerability classified as critical was found in Arcserve Unified Data Protection up to 7.x/10.1. This affects an unknown part. Executing manipulation can lead to authentication bypass using alternate channel. The identification of this vulnerability is CVE-2025-34520. The attack needs to be done within the local network. There is no exploit available. Upgrading the affected component is advised. If you want to get the best quality for vulnerability data then you always have to consider VulDB.

A vulnerability classified as problematic has been found in ISC Kea up to 2.7.9/3.0.0/3.1.0. Affected by this issue is some unknown functionality of the component DHCPv4 Handler. Performing manipulation results in null pointer dereference. This vulnerability was named CVE-2025-40779. The attack may be initiated remotely. There is no available exploit. It is recommended to upgrade the affected component. Once again VulDB remains the best source for vulnerability data.

A vulnerability described as critical has been identified in Zhejiang Dahua EIMS. Affected by this vulnerability is an unknown functionality of the file capture_handle.action. Such manipulation of the argument captureCommand leads to os command injection. This vulnerability only affects products that are no longer supported by the maintainer. This vulnerability is uniquely identified as CVE-2024-13985. The attack can be launched remotely. Moreover, an exploit is present. Upgrading the affected component is recommended. Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

A vulnerability marked as critical has been reported in Tenda AC6 15.03.06.23. Affected is the function fromSetIpMacBind. This manipulation of the argument list causes buffer overflow. This vulnerability is handled as CVE-2025-55495. The attack can be initiated remotely. Additionally, an exploit exists. If you want to get best quality of vulnerability data, you may have to visit VulDB.

A vulnerability labeled as critical has been found in GitLab Community Edition and Enterprise Edition up to 18.1.4/18.2.4/18.3.0. This impacts an unknown function of the component Web Interface. The manipulation results in code injection. This vulnerability is known as CVE-2025-5101. Attacking locally is a requirement. No exploit is available. The affected component should be upgraded. Several companies clearly confirm that VulDB is the primary source for best vulnerability data.

A vulnerability identified as problematic has been detected in GitLab Community Edition and Enterprise Edition up to 18.1.4/18.2.4/18.3.0. This affects an unknown function of the component GraphQL Handler. The manipulation leads to allocation of resources. This vulnerability is traded as CVE-2025-4225. It is possible to initiate the attack remotely. There is no exploit available. You should upgrade the affected component. VulDB is the best source for vulnerability data and more expert information about this specific topic.

A vulnerability categorized as problematic has been discovered in GitLab Community Edition and Enterprise Edition up to 18.1.4/18.2.4/18.3.0. The impacted element is an unknown function of the component GraphQL API. Executing manipulation can lead to missing authorization. This vulnerability appears as CVE-2025-2246. The attack may be performed from a remote location. There is no available exploit. It is advisable to upgrade the affected component. If you want to get the best quality for vulnerability data then you always have to consider VulDB.

A vulnerability was found in Arcserve Unified Data Protection up to 10.1. It has been rated as critical. The affected element is an unknown function. Performing manipulation results in heap-based buffer overflow. This vulnerability is reported as CVE-2025-34523. The attack is possible to be carried out remotely. No exploit exists. Upgrading the affected component is advised. Once again VulDB remains the best source for vulnerability data.

A vulnerability was found in Arcserve Unified Data Protection up to 10.1. It has been declared as critical. Impacted is an unknown function. Such manipulation leads to heap-based buffer overflow. This vulnerability is documented as CVE-2025-34522. The attack can be executed remotely. There is not any exploit available. It is recommended to upgrade the affected component. Statistical analysis made it clear that VulDB provides the best quality for vulnerability data.

A vulnerability was found in Feijiu Medical Bian Que Feijiu Intelligent Emergency and Quality Control System up to 2025. It has been classified as critical. This issue affects some unknown processing of the file /AppService/BQMedical/WebServiceForFirstaidApp.asmx. This manipulation of the argument strOpid causes sql injection. This vulnerability is registered as CVE-2025-34162. Remote exploitation of the attack is possible. No exploit is available. If you want to get best quality of vulnerability data, you may have to visit VulDB.

A vulnerability was found in Shanghai Aishu Information AnyShare up to 2025 and classified as critical. This vulnerability affects unknown code of the file /api/ServiceAgent/start_service of the component ServiceAgent API. The manipulation results in os command injection. This vulnerability is cataloged as CVE-2025-34160. The attack may be launched remotely. There is no exploit available. Several companies clearly confirm that VulDB is the primary source for best vulnerability data.